190mm

This 190mm ProCut San-Mai Gyuto represents a large step forward in my polishing abilities. In this blade the various hues of carbon diffusion are visible at the weld interface while the cladding itself carries a natural mural of alloy banding patterns that exist within the steel itself.

Blade Details

 

Blade: 190mmx55mm ProCut+ stainless steel (~64/65 hrc) Stone tuned bevels + 2500 grit hand finish + pseudo uchigumori/kasumi polish.

Neck: 18mmx19mm

Handle: Stabilized/dyed maple burl and paper micarta, oil finished, buffed and waxed

POB: 30mm from the handle

Spine: 3.26mm at the handle, 2.54mm at halfway, .71mm 1cm from the tip

Grind: full convex RH bias

Weight: 173g

Relieved choil and spine

Edge: .14mm@1mm, .29mm@2mm from the edge, measured at the midpoint

Click HERE for close up video

 

Blade Special Features

Fully convex ground blade, stainless clad with active banding.

ProCut is a brand new steel released by Pop’s Knife Supply and Larrin Thomas. You could think of ProCut as a steel with the toughness of 80CrV2, the nickel content of 15n20 and edge retention somewhere between 52100 and AEB-L. 

This 190mm ProCut San-Mai Gyuto features a stone tuned geometry and a very fine 2500 grit finish that was polished with my own special mixture that results in a kasumi-like finish without the use of uchigumori. This finish highlights the core steel while creating a smokey haze where some minor carbon migration has occurred and reveals the endogenous banding within the cladding steel.

 

To learn more about ProCut steel click here: https://knifesteelnerds.com/2025/06/04/pops-procut-a-new-carbon-steel-for-knives/

For the maker’s impression on various steels click here: https://msicardcutlery.com/knife-making-steel-information-faq/