-
Kitchen Knives
230mm MagnaCut Gyuto
$663.00Prices are Tariff Inclusive
A 230mm MagnaCut Gyuto
This 230mm MagnaCut gyuto features thicker than typical blade-stock with a fully convex bevels that serve to optimize cutting performance. Weight-wise I would categorize this knife as a midweight. The handle consists of oil finished and buffed Shedua. The choil and spine are nicely rounded and polished to 600 grit.
Blade Details
Blade: 233mmx51mm MagnaCut (~63hrc) with belt finish
Handle: Shedua, oil finished, buffed and waxed
POB: 40mm from the handle
Spine: 3.28mm at the handle, 2.25mm at halfway, .55mm 1cm from the tip
Grind: full convex 50/50
Weight: 185g
Relieved choil and spine.
Edge: .19mm@1mm, .28mm@2mm from the edge, measured at the midpoint
Blade Special Features
Fully convex ground blade
To learn more about MagnaCut steel click here: https://knifesteelnerds.com/2021/03/25/cpm-magnacut/
For the maker’s summative take on MagnaCut click here: https://msicardcutlery.com/knife-making-steel-information-faq/
-
Kitchen Knives
225mm MagnaCut Gyuto
$640.00Prices are Tariff Inclusive
A 225mm MagnaCut Gyuto
This 225mm MagnaCut gyuto features thicker than typical blade-stock with a fully convex bevels that serve to optimize cutting performance. Weight-wise I would categorize this knife as a midweight. The handle consists of oil finished and buffed cocobolo and walnut. The choil and spine are nicely rounded and polished to 600 grit.
Blade Details
Blade: 224mmx51mm MagnaCut (~63hrc) with belt finish
Handle: Cocobolo and walnut, oil finished, buffed and waxed
POB: 40mm from the handle
Spine: 2.97mm at the handle, 2.32mm at halfway, .64mm 1cm from the tip
Grind: full convex 50/50
Weight: 175g
Relieved choil and spine.
Edge: .19mm@1mm, .23mm@2mm from the edge, measured at the midpoint
Blade Special Features
Fully convex ground blade
To learn more about MagnaCut steel click here: https://knifesteelnerds.com/2021/03/25/cpm-magnacut/
For the maker’s summative take on MagnaCut click here: https://msicardcutlery.com/knife-making-steel-information-faq/
-
Kitchen Knives
270mm MagnaCut Sujihiki
$610.00Prices are Tariff Inclusive
A 270mm MagnaCut Sujihiki
This 270mm MagnaCut sujihiki is one of only a few stainless sujihikis I’ve ever made and one of only 3 I’ve made with MagnaCut. The handle consists of buffalo horn and stabilized maple burl. The choil and spine are nicely rounded and polished to 600 grit.
Blade Details
Blade: 274mmx38mm MagnaCut (~63hrc) with belt finish
Neck: 17mmx16mm
Handle: Horn and stabilized maple burl, oil finished, buffed and waxed
POB: 55mm from the handle
Spine: 2.65mm at the handle, 2.55mm at halfway, .91mm 1cm from the tip
Grind: full convex 50/50
Weight: 178g
Relieved choil and spine.
Edge: .27mm@1mm, .39mm@2mm from the edge, measured at the midpoint
Blade Special Features
Fully convex ground blade
To learn more about MagnaCut steel click here: https://knifesteelnerds.com/2021/03/25/cpm-magnacut/
For the maker’s summative take on MagnaCut click here: https://msicardcutlery.com/knife-making-steel-information-faq/

