225mm MagnaCut Gyuto -Hand Finished W/Burl+Horn Handle

Prices are Tariff Inclusive

A 225mm MagnaCut gyuto

This 225mm MagnaCut gyuto features thicker than typical blade-stock with a fully convex, stone tuned and hand finished bevels that serves to optimize both aesthetic appeal and cutting performance. Weigh-wise I would categorize this knife as a light midweight. The handle consists of a combination of oil finished and buffed stabilized mottled maple burl and black buffalo horn. The choil and spine are nicely rounded as always but polished to a much higher degree than standard at 2500 grit.

Blade Details

Blade: 225mmx51mm MagnaCut (~63hrc) with stone turned bevels and a 500 grit hand finish

Neck: 18mmx18mm

Handle: Stabilized mottled maple burl and horn, oil finished buffed and waxed

POB: 29mm from the handle

Spine: 3.25mm at the handle, 2.28mm at halfway, .45mm 1cm from the tip

Grind: full convex RH bias

Weight: 179g

Relieved choil and spine-polished to 2500 grit.

Edge: .14mm@1mm, .25mm@2mm from the edge, measured at the midpoint

Blade Special Features

Fully convex ground blade

To learn more about MagnaCut steel click here: https://knifesteelnerds.com/2021/03/25/cpm-magnacut/

For the maker’s summative take on MagnaCut click here: https://msicardcutlery.com/knife-making-steel-information-faq/