240mm MagnaCut Gyuto -Hand Finished W/Birdseye Maple + Horn Handle

Prices are Tariff Inclusive

A 240mm MagnaCut gyuto

This 240mm MagnaCut gyuto features thicker than typical blade-stock with a fully convex, stone tuned and hand finished bevels that serves to optimize both aesthetic appeal and cutting performance. Weight-wise I would categorize this knife as a midweight. The handle consists of a combination of oil finished and buffed roasted birds-eye maple and black buffalo horn. The choil and spine are nicely rounded as always but polished to a much higher degree than standard at 2500 grit.

Blade Details

Blade: 239mmx50mm MagnaCut (~63hrc) with stone tuned bevels and a 500 grit hand finish

Neck: 19mmx18mm

Handle: Roasted birdseye maple and horn, oil finished buffed and waxed (the crack on the right side of the handle has been filled and stabilized with CA glue)

POB: 50mm from the handle

Spine: 3.68mm at the handle, 2.91mm at halfway, .67mm 1cm from the tip

Grind: full convex RH bias

Weight: 192g

Relieved choil and spine-polished to a 2500 grit semi-mirror finish.

Edge: .16mm@1mm, .33mm@2mm from the edge, measured at the midpoint

Blade Special Features

Fully convex ground blade

To learn more about MagnaCut steel click here: https://knifesteelnerds.com/2021/03/25/cpm-magnacut/

For the maker’s summative take on MagnaCut click here: https://msicardcutlery.com/knife-making-steel-information-faq/