225mm ProCut +Wrought Iron San-Mai Gyuto

This 225mm ProCut blade will be my first available in this new and innovative steel. I’ve elected to utilize san-mai construction for my ProCut blades owing to the costs associated with acquiring it. ProCut is a brand new steel released by Pop’s Knife Supply and Larrin Thomas. You could think of ProCut as a steel with the toughness of 80CrV2, the nickel content of 15n20 and edge retention somewhere between 52100 and AEB-L. 

This 225mm ProCut blade features a stone tuned geometry and a very fine 2500 grit finish that was finished with my own special polishing mix that results in a kasumi-like finish without the use of uchigumori

Please note that there is a small blemish in the handle where a chip was repaired during construction.

Blade Details

Blade: 224mmx51mm ProCut+ Wrought Iron (~64/65 hrc) Stone tuned bevels + 2500 grit hand finish + pseudo uchigumori/kasumi polish.

Neck: 17mmx18mm

Handle: Stabilized amboyna burl, oil finished, buffed and waxed

POB: 42mm from the handle

Spine: 3.29mm at the handle, 2.70mm at halfway, .65mm 1cm from the tip

Grind: full convex RH bias

Weight: 183g

Relieved choil and spine

Edge: .17mm@1mm, .28mm@2mm from the edge, measured at the midpoint

Blade Special Features

Fully convex ground blade, wrought iron clad.

To learn more about ProCut steel click here: https://knifesteelnerds.com/2025/06/04/pops-procut-a-new-carbon-steel-for-knives/